Injection Molding Design Guide
With the right resources, even the most complex plastic parts can be designed for the injection molding process.
Our part design guides will help you to address a variety of design challenges. For example, optimizing your part designs for manufacturability, cost, and time to market.
To speak with one of our experts about a design challenge, please contact Elimold’s design consultants.
- Draft
- Flash
- Gates & Runners
- Hinge & Snaps
- Insert Molding
- Knit Lines
- Overmolding
- Ribs & Bosses
- Sink & Warp
- Surface Finishes
- Text on Parts
- Threading
- Tolerances
- Tooling
- Undercuts
- Wall Thickness
Contact Elimold Design Consultants
Ready to get started with an injection molding project?